非齐次Poisson过程的若干新性质

本文在一些文献的基础上,进一步讨论非齐次Poisson过程的某些性质,给出了若干新性质。 设{N(t),t≥0}是累积强度为的非齐次Poisson过程。迄今的文献(如[1][2]等)指出,(?)n≥1,前n个到达时刻τ_1,τ_2,…,τ_n的联合概率密度为 本文定理1指出,上式不仅是必要的,而且是充分的,并给出了充分性的证明。从而,得到了描写过程统计规律的一个刻画。然后,在N(t_i)=n_i(i=1,…,k,0相似文献   

结构随机跳变系统的条件滤波新方法

提出了不完全状态及控制信息的结构随机跳变系统的滤波方法，解决了结构随机跳变系统在控制入与状态的观测互为相关情况下，系统的状态以及不确知的控制输入的最优估计问题。并以线性高斯情况为例进行了数字仿真，证明了该方法的有效性。     

Analysis and control of the compaction force in the composite prepreg tape winding process for rocket motor nozzles

In the process of composite prepreg tape winding, the compaction force could influence the quality of winding products. According to the analysis and experiments, during the winding process of a rocket motor nozzle aft exit cone with a winding angle, there would be an error between the deposition speed of tape layers and the feeding speed of the compaction roller, which could influence the compaction force. Both a lack of compaction and overcompaction related to the feed-ing of the compaction roller could result in defects of winding nozzles. Thus, a flexible winding sys-tem has been developed for rocket motor nozzle winding. In the system, feeding of the compaction roller could be adjusted in real time to achieve an invariable compaction force. According to exper-iments, the force deformation model of the winding tape is a time-varying system. Thus, a forgetting factor recursive least square based parameter estimation proportional-integral-differential (PID) controller has been developed, which could estimate the time-varying parameter and control the compaction force by adjusting the feeding of the compaction roller during the winding process. According to the experimental results, a winding nozzle with fewer voids and a smooth surface could be wounded by the invariable compaction force in the flexible winding system.     

A compositional method to model dependent failure behavior based on PoF models

In this paper, a new method is developed to model dependent failure behavior among failure mechanisms. Unlike the existing methods, the developed method models the root cause of the dependency explicitly, so that a deterministic model, rather than a probabilistic one, can be established. Three steps comprise the developed method. First, physics-of-failure(PoF) models are utilized to model each failure mechanism. Then, interactions among failure mechanisms are modeled as a combination of three basic relations, competition, superposition and coupling. This is the reason why the method is referred to as ‘‘compositional method". Finally, the PoF models and the interaction model are combined to develop a deterministic model of the dependent failure behavior. As a demonstration, the method is applied on an actual spool and the developed failure behavior model is validated by a wear test. The result demonstrates that the compositional method is an effective way to model dependent failure behavior.     

Stark broadening of B IV lines for astrophysical and laboratory plasma research

Stark broadening parameters for 36 multiplets of B IV have been calculated using the semi-classical perturbation formalism. Obtained results have been used to investigate the regularities within spectral series and temperature dependence.     

Stark widths of Ar III spectral lines in the atmospheres of subdwarf B stars

Using semiclassical perturbation approach in impact approximation, we have calculated Stark widths for 32 spectral lines of doubly charged argon (Ar III). Oscillator strengths are calculated using Hartree–Fock method with relativistic correction (HFR) and an atomic model including 17 configurations. Energy levels are taken from NIST database. For perturbing levels for which the corresponding energy does not exist in NIST database, the calculated energies are used. Our widths are compared with the experimental results. The results presented here are of interest for modelling and investigation of stellar atmospheres since argon in different ionization stages is observed in many astrophysical objects. Finally, the importance of Stark broadening mechanism is studied in the atmospheric conditions of sdB stars. Electron impact Stark widths are compared to thermal Doppler widths as a function of temperature and optical depth of atmospheric layers.     

高阶矩谱分析与空间等离子体非线性相互作用识别

利用高阶矩统计分析方法对ＡＵＲＥＯＬ－３卫星观测数据进行分析处理，所涉及的信号分别为ＥＬＦ频率范围内的电场扰动Ｅｈ（ｔ）和等离子体密度波动δＮｅ／ｎｅ（ｔ），处理结果表明：利用高阶矩谱分析方法可以很好地识别空间等离了波－粒相互作用过程中的非线性成分     

非金属电热膜材料及工艺分析

本文论述了制作电热膜的工艺过程.对电热膜的材料、烧结工艺及使用寿命进行了试验,获得了有价值的结论.并论述了提高电热膜产品寿命应注意的问题.     

疲劳学的研究进展

随机疲劳、混沌疲劳及复合材料疲劳寿命估算属疲劳学研究的三个重要前沿。给出了疲劳损伤的动态概率分布；对混沌疲劳进行了初步探索；且给出了用于复合材料疲劳寿命估算的损伤演化方程。     

随机疲劳累积损伤可靠性分析模型

将疲劳损伤累积过程看作是能量耗散的不可逆过程，从随机过程的角度，研究了各类随机损伤累积法则均应满足的若干必要条件，对目前已有的一些概率型疲劳损伤累积法则的统计相容性进行了较为系统的理论分析，建立了一类不依赖于疲劳寿命具体分布形式的随机疲劳累积损伤可靠性分析模型。